Safety¶
Warning
The operator must have read and understood all of the instructions in this manual before handling the rc_reason_stack product.
Warning
If operating the rc_reason_stack with rc_visard product(s), the operator must have read and understood all of the safety, installation, and maintenance instructions given in the rc_visard manual.
Note
The term “operator” refers to anyone responsible for any of the following tasks performed in conjunction with rc_reason_stack:
- Installation
- Maintenance
- Inspection
- Calibration
- Programming
- Decommissioning
This manual explains the rc_reason_stack’s various components and general operations regarding the product’s whole life-cycle, from installation through operation to decommissioning.
The drawings and photos in this documentation are representative examples; differences may exist between them and the delivered product.
General warnings¶
Note
Any use of the rc_reason_stack in noncompliance with these warnings is inappropriate and may cause injury or damage as well as void the warranty.
Intended use¶
Warning
The rc_reason_stack is NOT intended for safety critical applications.
The GigE Vision® industry standard used by the rc_reason_stack does not support authentication and encryption. All data from and to the device is transmitted without authentication and encryption and could be monitored or manipulated by a third party. It is the operator’s responsibility to connect the rc_reason_stack only to a secured internal network.
Warning
The rc_reason_stack must be connected to secured internal networks.
The rc_reason_stack may be used only within the scope of its technical specification. Any other use of the product is deemed unintended use. Roboception will not be liable for any damages resulting from any improper or unintended use.
Warning
Always comply with local and/or national laws, regulations and directives on automation safety and general machine safety.